Our CRL Glass Rail Standoff Fittings can be used two ways to mount glass up to 3/4" (19 mm) thick. The Drill-Through Method will allow flush mounting of the glass to the surface of the substrate. The steel back plate can also be fastened directly to steel supports, raising the glass off of the surface.

Catalog Number: RS0B20BS

Stainless Steel Standoffs with Mounting Plate

  • This versatile Standoff Fitting features 2" (51 mm)diameter caps on threaded bolts to secure the glass. The 2" (51 mm) diameter Standoffs are fastened to a 3/8" (9.5 mm) thick, 316 grade stainless steel plate that is pre-drilled for mounting. Two popular stainless finishes are available from stock. For additional information, contact CRL Technical Sales Department. SPECIFICATIONS: For Use with 1/2" or 3/4" (12 or 19 mm) Tempered Glass (Do Not Use with Raw or Annealed Glass) Glass Fabrication: Two 3/4" (19 mm) Diameter Holes Per Fitting Spacing: Maximum Spacing Between Fittings is 24" (609 mm) Center-to-Center; Hole Spacing Between Standoffs is 4" (102 mm). Important Notes: For Use with 1/2" or 3/4" (12 or 19 mm) Tempered Glass (Do not use with raw or annealed glass). NOTE: Maximum Bracket Spacing is 24" (610 mm) on Center with 48" (1219 mm) Maximum Glass Panel Widths.
*Please note:   There is no VAT to add to our prices*