The CRL Laguna Series Wall Mount Single Slider Kit contains all the components you will need (except the tempered glass) to complete this style of installation. This model is used in applications where you are attaching a single sliding door to the inside face of a sufficiently reinforced wall.


Laguna Single Sliding Glass Door System. LSWM5BS

  • The Anti-Lift Sliding Door Top Rollers can be attached to the glass with either Surface Mount or Flush Mount Fittings (both are supplied). The Rollers have a 1/8" (3.2 mm) up or down vertical adjustment to aid in door alignment. This system should only be used with 3/8" or 1/2" (10 or 12 mm) tempered glass. Laminated glass cannot be used. DOOR SYSTEM LIMITATIONS: Maximum Door Weight: 220 Lbs. (100 kg) Maximum Panel Width: 53-1/2" (1.36 m) Maximum Panel Height: 98-7/16" (2.50 m) Maximum Track Length: 104" (2.64 m) EACH KIT CONTAINS: Two CRL Laguna Series Anti-Lift Top Rollers with Glass Fittings One CRL Laguna Series Top Sliding Tube with End Caps at 104" (2.64 m) in Length Five CRL Laguna Series Top Sliding Tube Wall Mount Clamps Two CRL Laguna Series Door Stops (One Left Hand and One Right Hand) One CRL Laguna Series Bottom Floor Guide Complete glass fabrication details and drawings are available by contacting our Technical Sales Department. NOTE: These Fittings are not for use with laminated glass.
*Please note:   There is no VAT to add to our prices*