The CRL Laguna Series Wall Mount Bi-Parting Slider Kit contains all the components you will need (except the tempered glass) to complete this style of installation. This model is used in applications where you are attaching two bi-parting sliding doors to the inside face of a sufficiently reinforced wall.
SKU - LSWM6BS
Laguna Double Sliding Glass Door System. LSWM6BS
SKU: LSWM6BS
£575.00Price
- The Anti-Lift Sliding Door Top Rollers can be attached to the glass with either Surface Mount or Flush Mount Fittings (both are supplied). The Rollers have a 1/8" (3.2 mm) up or down vertical adjustment to aid in door alignment. This system should only be used with 3/8" or 1/2" (10 or 12 mm) tempered glass. Laminated glass cannot be used. DOOR SYSTEM LIMITATIONS: Maximum Door Weight: 220 Lbs. (100 kg) Maximum Panel Width: 53-1/2" (1.36 m) Maximum Panel Height: 98-7/16" (2.50 m) Maximum Track Length: 104" (2.64 m) EACH KIT CONTAINS: Four CRL Laguna Series Anti-Lift Top Rollers with Glass Fittings Two CRL Laguna Series Top Sliding Tubes with End Caps at 104" (2.64 m) in Length Ten CRL Laguna Series Top Sliding Tube Wall Mount Clamps Four CRL Laguna Series Door Stops (Two Left Hand and Two Right Hand) Two CRL Laguna Series Bottom Floor Guides Complete glass fabrication details and drawings are available by contacting our Technical Sales Department. NOTE: These fitting are not for use with laminated glass.