This CRL Shower Pull and Hinge Set consists of two each GEN037 Wall Mount Hinges plus one set BM6X6 Pull Handles with metal washers. We've made it easier for you to get two of our most popular Hinge and our best-selling Pull Handle by combining them in one easy-to-order set. These Wall Mount Hinges or Top and Bottom Mount Pivot Hinges make up over 90 percent of our demand.
Available in our 3 most popular finishes;
Chrome - SKU - GENS3CH
Brushed - SKU - GENS3BN
Brass - SKU - GENS3BR
Geneva Shower Door Pull Handle and Hinge Set - CH
- Standard Reversible Pivot Pin: Each Geneva Hinge contains a Reversible Pivot Pin. One side of the Pin is marked 90 Degrees. The opposite side is marked 85 Degrees. Standard Geneva Hinges come with the 90 Degrees side activated. Offset Models come with the Pin pre-set to 85 Degrees (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side. Custom Pivot Pin: Custom Pivot Pins (Cat. No. GENP1N) are available to accommodate "off-angle" installations. If the 5 Degree Reversible Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degrees). If using the Custom Pivot Pin, contact our Technical Sales Shower Door Department. Your glass sizes and the aesthetics of the enclosure may be affected by the use of the Custom Pivot Pin. Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm). Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm). SPECIFICATIONS: Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass Special Feature: Offers choice of Standard Model factory set at standard 0° closing position, or 5º Pre-Set Model for tighter closure into shower interior. Construction: Solid Brass Hinge Swings: 90º in and 90º Out Closing Type: Self-Centering when within 15º of Closed Position Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions.