op Door Patch Fitting includes the 1NT303 Insert for use with our CRL9040WBP Top Walking Beam Pivot, 1NT401 Surface Mount Top Pivot, 1NT405 Threaded Top Pivot, or other 19/32" (15 mm) Diameter type pivots. Finished covers are available in four standard finishes. Gaskets are supplied that allow this Patch Fitting to be used with either 3/8" or 1/2" (10 or 12 mm) Glass.
2-9/16" (65 mm) Pivot Setback
High Density Cast Body
For 3/8" or 1/2" (10 or 12 mm) Glass
Catalog Number: PH21ABS
Finish: BRUSHED STAINLESS
Brushed Stainless Top Door Patch Fitting with 1NT303 Insert
The following guidelines are to be used when making a door using this hardware:
Maximum Height: 108" (2.74 m)
Maximum Weight: 176 Lbs. (80 kg)
Maximum Width: 43" (1.11 m)
If the door exceeds any of these limitations, full door rails should be used.
GLASS FABRICATION REQUIRED:
One 3/4" (19 mm) Diameter
Hole and Corner Notch
Template and Instructions